Window Film One Way Mirror Window Clings Privacy Sticker UV Insulate Reflect

Description

One Way Mirror Window Film
Together with Haton one way mirror window film to create a comfortable office environment or a relaxing lounge which are free from glare and ultraviolet radiation interference. The Haton one way mirror window film can found a highly private indoor space by reflecting the strong external light.
UV Protection
- Blocks out 99% of UV rays and 85% of infrared rays, protect our eyes or skin from the harm
Heat Insulation
- The mirror window film can effectively eliminate nearly 80% of the heat.
Privacy Protection
- Provides great intended privacy during daytime only while the outside glass shows mirror reflective effect.
Energy Saving
- Warm and comfortable in winter, heat insulation in summer, reducing the energy costs
Non Adhesive
- Static window film comes with glue free design, no chemical release, very easy to install.
Excellent Mirror Effect & Daytime Privacy Protection
From the inside to the outside, the window film blocks strong light and has no deformation of the scene; from the outside to the inside, it has a harmonious appearance and adds beauty to the living room.
Notice: When the inside light is stronger than outside at night, the film cannot provide privacy, and the mirror reflective effect will disappear. Do remember to draw curtain during night.
Excellent Mirror Effect
Highly-reflective material provides superior daytime privacy. The most visible side will become a mirror. Therefore, the effect of any reflective, privacy-enhancing window film will depend greatly on lighting conditions.
UV blockout
Blocking ultraviolet rays helps alleviate premature discoloration of furniture. Ultraviolet ray is an important cause of the fading of household items such as curtains and furniture, which also harm to our skin. It allows visible light to enter while blocking harmful ultraviolet rays.
Privacy Protection
Glare will happen to people who work in sunny offices. It may cause headaches and distract attention, which further leads to a reduction in work efficiency. But after using the mirror window film, glare phenomena can be greatly reduced and even eliminated.
Installation Tips
Instrction: Measure, Trim, and Clean
Step 1: Measure the target surface.
Step 2: Cut the film to the required size using a utility knife or a scissor. Leave an extra inch margin each side for later adjustment.
Step 3: Clean the target surface thoroughly with soapy water. Make sure there's no dust or stain left.
Remove the Clear Backing Film
Step
3: Important!
Please remember to peel off the backing film before installation, or the film may fall off the window.
To better remove the film, you may attach 2 pieces of scotch tape onto both sides of one corner, and then quickly remove them to separate the backing from the film.
Apply the Film
Step 4: Spray both the target surface and the attaching side of the window film with water. You may use soapy water instead for an easier application.
Step 5: Gently Apply the window film to the target surface. While applying, use a cloth or your hand to help flatten the film.
Smoothen the Film and Trim off the Margin
Step 6: Use a cloth or a squeegee to remove any excess water or air bubbles. Make sure the film is completely flatten out without any air or water left inside.
Step 7: Trim off excess margins using a utility knife.
Well Done!
Notice:
films that are sensitive by nature. Please remember to take caution when handling the film as the slight fold may create a permanent wrinkle.