One Way Mirror Window Film Self adhesive Sticker Anti UV Privacy Glass Tint Home

Description

Untitled Document
One Way Mirror Window Film Self adhesive Sticker
Features
Color - Silver / Black Type - Vinyl Self-adhesive
Function ,
PRIVACY PROTECTION -
The one way mirror window film provides great intended privacy during DAYTIME ONLY; the mirror-effect is reversed at night since the interior will be exposed to more light than the exterior. The side with the most light will have the mirror-like appearance
HEAT INSULATION AND ENERGY SAVING -
Blocking out 90% of infrared rays, the heat control window film can retain heat in winter and keep it out in summer, helping reduce expensive energy costs. NOT RECOMMENDED for DUAL PANE WINDOWS
USING THE NEW GLUE -
This home tinted window film is not sticky after water immersion and is easier to install than a glue film; after the water is dry up, the viscosity is restored and becomes even stronger. Remember to use A LOT of soapy water to wet both the adhesive side and window surface
EFFECTIVE UV REJECTION -
UV solvents added at the bottom, the window reflective film can blocks out 99% of UV rays, and reduces fading and aging of interior furnishings, anti-scratch layer on the surface, friction resisting, won’t fade nor blister, easy to remove, economical and practical
Different effect between daytime and night -
The outside glass will show a mirror effect as well as keep your privacy only during daytime, and you can see outside from inside. When evening indoor light is stronger, then the glass outside will lose mirror effect as well as outside people can see inside, so remember to draw shades if necessary.
Package Included
1* Solar Film
How to Use: Clean the Surface and Get the Needed Film
1.Clean the target surface thoroughly. Make sure there is no oil, dust, or stain left. 2.Measure and trim the film to the required size. Please trim it carefully with your sharp knife cutter for it would tear if you use too much force.
3.Peel off the backing film. Please affix tapes on both sides of the window film to separate. 4.Spray a lot of water both on the films and window surface (Very Important).
5.Apply the film to window glass. 6.Use the soft towel or squeegee to wipe the film back and forth to make sure that the bubbles and water have been totally removed.
7.Trim off the margins. 8.Use a cloth or squeegee to flatten out the film. Teamwork will be more helpful!
Note - Please be reminded that due lighting effects, monitor's brightness/contrast settings etc. there could be some slight differences in the color tone of the website's photo and the actual item.     your kind understanding will be much appreciated.